How to build a puppet ventriloquist high-motion

This ArticleA must print to show, the art of ventriloquism ventriloquist dummy non-realistic. You can use your own ventriloquist dummy puppet head, with which you move the eyes and mouth, as you the art of "send" your voice on an inanimate object that speak a human being is imitation. Supplies from a hardware store, a hobby shop and a beauty saloon will be required, such as tools, which are often found in most homes. Not any special skills requires the dummy.

Relatives search: difficulty: ModerateInstructions things youll Needham Mannequin dummy head4 metal rods, 1/2-inch diameter, 10-inch long eachRulerPencil2 shake student EyeballsBonding GlueChattering TeethWig, short or long HairedSuggest Edits1

Was the mannequin dummy head on a desktop with the in front of you to. Press a metal rod through the parts of the manikin's head, where the two orbits are located. Stop pushing the bar when it exits from the other side. Rotate the rod a dozen times in a clockwise direction around each hole above pulls it enlarge of the manikin's head.

2

Measure the width of indentation of the mouth on the head. Make a point on the halfway mark on the top and bottom of the Indent. Push the metal rod through each point until it exits from the rear. Rotate the rod a dozen times in a clockwise direction around each hole above pulls it enlarge of the manikin's head.

3

Placing the two eyeballs on a surface with the "shake" students down. You stick glue to the back of each eyeball. Press one end of one of the wires against the back of the eyeballs. Keep the wire end against the eyeball for two minutes. Repeat this process with a different wire and the other eye.

4

You set up the "toys" teeth of the desktop with the back of you used to. A DAB paste Wenden sticking to the top in the middle of the teeth. Put an end to one of the wires against bonded at the beginning. Keep the cable against the teeth for two minutes. Rotate the teeth and repeat the process with a different wire just completed. Let the glue set overnight.

5

Press on the wires connected each eyeball by one of the two holes in the part of the manikin's head. Stop you push the wire by when it exits from the rear.

6

Press the wires at the top and bottom edges of the teeth by the corresponding holes in the head. Stop the wires move out when they close out the back. The manikin's head cut the cable closest to a vertical channel of and below the wire closest to the dummy of neck with a knife.

7

Apply glue glue on the inside of the wig, which is placed on the head. a short-haired wig when the dummy is a boy and a long-haired wig when the dummy is a girl. Put the wig on the manikin's head and press down. Keep the wig against the head for two minutes. Let the glue set overnight.

8

Press the eyes and teeth against the manikin's head. Testing of the movement, that you do with them can move to track the wires for the eyeballs, is what aimed at his head back and forth and the wires going up and down for the teeth to open and close.

Tips & warnings

You can add the head before the features color.

Recommend article

ResourcesHouse of Decption: history of VentriloquismRead continue:

Print this ArticleCommentsFollow eHowFollow

View the Original article